I have a 2001 VF3 and the fan on the cabinet door quit working. I checked for voltage and have 114.7 volts there so I figured the fan was bad and bought a new one but it would not work either. So then I plugged the "bad" fan into the plug for the fan right below the servos and it works. Plug it back into the door cabinet plug and nothing, even though it shows 114.7 volts?
The "output" on the circuit board is P5 and I get 114.7 volts there. Also checked P6, the one that powers the other fan (the one that works) and same voltage. If I plug the fan that works into P5 I get nothing even though it shows 114.7 volts?
What am I doing wrong to figure this out?
The "output" on the circuit board is P5 and I get 114.7 volts there. Also checked P6, the one that powers the other fan (the one that works) and same voltage. If I plug the fan that works into P5 I get nothing even though it shows 114.7 volts?
What am I doing wrong to figure this out?