chevelless502
Plastic
- Joined
- Aug 18, 2017
We have a Haas SL30 lathe with a Servo Bar 300 bar feeder. We are running into an issue with the first part off of a new bar not being the correct length. We noticed there are two methods on programming in the has manual. One method involves just rerunning the same program over and over. The other method involves facing off the end of a new bar then running all of the parts. Then when it loads a new bar it will face it off again then run the parts. We can’t seem to understand how the second option works. Does anyone here have time to write up a sample program on how it would work? Say using .750 material that is going to be cut in 2.00” lengths for an example. Our parting tool is .195 wide. We can use the same parting tool as a face off tool correct? It is just a simple cut off operation and all of the parts come off well with in tolerance except for the very first one off of the bar.
Thanks in advance for any help.
Andy
Thanks in advance for any help.
Andy