swiss blade
Aluminum
- Joined
- Jul 26, 2014
- Location
- Ohio
I recently wrote a little macro program to alarm when the machine reached a certain coolant level.
%
O00007
Macro Coolant Program
#801= #1094
IF [ #801 LT 46000 ] GOTO100
IF [ #801 GT 46000 ] GOTO200
N100
#3000= 1 (LOW COOLANT LEVEL)
N200
(PART PROGRAM)
M30 (or M99 if you run as a sub program M98)
%
I ran it as an M98 sub program call; it worked great!
So....I know that as you run a machine for any length of time, you will figure out little tips and tricks that either help you work more efficiently or are just plain cool.
Please post the little tips, tricks, and tid-bits that you've picked up on your Haas machines along the way.
%
O00007
Macro Coolant Program
#801= #1094
IF [ #801 LT 46000 ] GOTO100
IF [ #801 GT 46000 ] GOTO200
N100
#3000= 1 (LOW COOLANT LEVEL)
N200
(PART PROGRAM)
M30 (or M99 if you run as a sub program M98)
%
I ran it as an M98 sub program call; it worked great!
So....I know that as you run a machine for any length of time, you will figure out little tips and tricks that either help you work more efficiently or are just plain cool.
Please post the little tips, tricks, and tid-bits that you've picked up on your Haas machines along the way.