Hi All,
I have a 2004 TM2 and tried rigid tapping with an M16 x2mm tap.
My machine stopped 2 threads in and would not turn.
I had to turn the tap out by hand while hand feeding the machine.
Is a Haas TM2 capable of rigid tapping M16 or 5/8"?
I am trying to determine if my motor has a problem or if I was tapping incorrectly.
Speed was 500 with a feed of 250.
I have a 2004 TM2 and tried rigid tapping with an M16 x2mm tap.
My machine stopped 2 threads in and would not turn.
I had to turn the tap out by hand while hand feeding the machine.
Is a Haas TM2 capable of rigid tapping M16 or 5/8"?
I am trying to determine if my motor has a problem or if I was tapping incorrectly.
Speed was 500 with a feed of 250.