Nick Mueller
Titanium
- Joined
- Jun 12, 2006
- Location
- Munich / Germany
Hi!
I do have a TL2 with the M19 option, so that should work. Software version is 9.whatever (forgotten, am already at bed).
Now as I don't have a real live tooling, I have a milling spindle clamped into the QCTP.
I started very simple and oriented the spindle, plunged in with the mill and rotated 90º and retract. Works!
Actually, I need an excentric bore, so I added an U-value to the G05. And here my troubles start. Spindle rotates 90° without any X move, stops and then X moves a tad, just to fall asleep and get stuck. Program never ends.
Here is my code (metric):
T40;
G54;
M19;
G98;
G00 X40. Z0.5;
G01 Z-1. F200;
G05 R90. U-1. F200; <= hangs with the U-1.
G00 Z5.;
M30;
G112 doesn't work at all, but that's a different storry.
Any hints?
Nick
I do have a TL2 with the M19 option, so that should work. Software version is 9.whatever (forgotten, am already at bed).
Now as I don't have a real live tooling, I have a milling spindle clamped into the QCTP.
I started very simple and oriented the spindle, plunged in with the mill and rotated 90º and retract. Works!
Actually, I need an excentric bore, so I added an U-value to the G05. And here my troubles start. Spindle rotates 90° without any X move, stops and then X moves a tad, just to fall asleep and get stuck. Program never ends.
Here is my code (metric):
T40;
G54;
M19;
G98;
G00 X40. Z0.5;
G01 Z-1. F200;
G05 R90. U-1. F200; <= hangs with the U-1.
G00 Z5.;
M30;
G112 doesn't work at all, but that's a different storry.
Any hints?
Nick