SeymourDumore
Diamond
- Joined
- Aug 2, 2005
- Location
- CT
Guys, I have a problem.
Might be retarded and can't figure out something this simple but ...
How do you enable the Rigid Tap option?
I have the unlock code but I cannot enter the dammned thing!!!
About 6 months ago I had to reload the software in my MiniMill. It got corrupted during the battery change.
Anyhow, after the install ( actually a couple rev. worth of upgrade) all saved parameters and settings were properly reloaded.
Few weeks later, I got the 144 alarm. Had the code, entered it, all is well .... or so I thought.
Until now I did not need to tap, so I've never noticed that the Rigid Tap option also got disabled during the software load.
I have the 4 digit code
I turn off Parameter Lock
Get to the Rigid Tap option in Parameters
I type in the 4 digit code and hit ENTER
Nothing happens, the option remains at 0
What am I missing?
This is the code that came with the machine back in 2002, and it was working fine until the sw load.
Thanks
Might be retarded and can't figure out something this simple but ...
How do you enable the Rigid Tap option?
I have the unlock code but I cannot enter the dammned thing!!!
About 6 months ago I had to reload the software in my MiniMill. It got corrupted during the battery change.
Anyhow, after the install ( actually a couple rev. worth of upgrade) all saved parameters and settings were properly reloaded.
Few weeks later, I got the 144 alarm. Had the code, entered it, all is well .... or so I thought.
Until now I did not need to tap, so I've never noticed that the Rigid Tap option also got disabled during the software load.
I have the 4 digit code
I turn off Parameter Lock
Get to the Rigid Tap option in Parameters
I type in the 4 digit code and hit ENTER
Nothing happens, the option remains at 0
What am I missing?
This is the code that came with the machine back in 2002, and it was working fine until the sw load.
Thanks