bb218
Aluminum
- Joined
- Jun 26, 2005
- Location
- Southern Indiana
I am having an issue with my TL1 Lathe, it will not stay powered down. When I hit the Auto off button the machine will shut off, then immediately power back up and go thought the start-up cycle. Using the Power Off button will do the same thing, it will power down then power back up.
I put an Ohm on the power on switch and it is Normally Open and is working correctly. The power off button will power it off but when I release the button it powers back up. Is there any parameters that might have gotten changed that would keep the control in the on state ?
When I kill the main breaker to shut the machine off then later turn the breaker back to On the machine stays off until I push the On button, so I think the switches are good.
I put an Ohm on the power on switch and it is Normally Open and is working correctly. The power off button will power it off but when I release the button it powers back up. Is there any parameters that might have gotten changed that would keep the control in the on state ?
When I kill the main breaker to shut the machine off then later turn the breaker back to On the machine stays off until I push the On button, so I think the switches are good.