mikeknell
Aluminum
- Joined
- Sep 25, 2009
- Location
- California
I have a Haas mill with the probe and tool setter.
I currently thread mill 1/8 npt with a single helix and it works fine.
I have the tool move down to .400 when I measure the diameter, and I can always have a good thread on the first try.
I would like to thread mill 1/4 npt, 3/8 npt, and 1/2 npt, but I want to use a better program which uses the 4 arcs, along with the cutter height to measure diameter on the tool setter.
Can anybody provide the programs they have successfully used?
Thanks,
Mike
I currently thread mill 1/8 npt with a single helix and it works fine.
I have the tool move down to .400 when I measure the diameter, and I can always have a good thread on the first try.
I would like to thread mill 1/4 npt, 3/8 npt, and 1/2 npt, but I want to use a better program which uses the 4 arcs, along with the cutter height to measure diameter on the tool setter.
Can anybody provide the programs they have successfully used?
Thanks,
Mike