Results 1 to 4 of 4
  1. #1
    DobermanDave is offline Cast Iron
    Join Date
    May 2006
    Location
    Cisco TX
    Posts
    368

    Exclamation Picture of mini mill battery location

    Anyone have a picture of the battery location on a Haas mini mill?
    2004 model. That would help a bunch. I'm getting ready to move & want to
    have the battery replaced as it's been in there since I bought it in 2004.

    Thanks for any help.

  2. #2
    Gmurillo84 is offline Plastic
    Join Date
    Aug 2011
    Location
    CA, USA
    Posts
    2

    Default

    I do not have a picture but if you open your control cabinet and look to the top left you will see a sheet metal cover and under it three boards. The third board back is usually the processor board, it will have a green or yellow battery on it you cant miss. the problem is if you remove the battery with out a plug in battery connected to the board you will lose the machine software and any other saved information. You first need a Part # 32-1010 plug in battery which your dealer should have on hand. Then you can remove the other battery and solder in the new one.

  3. #3
    DobermanDave is offline Cast Iron
    Join Date
    May 2006
    Location
    Cisco TX
    Posts
    368

    Question Run on plug in battery?

    Quote Originally Posted by Gmurillo84 View Post
    I do not have a picture but if you open your control cabinet and look to the top left you will see a sheet metal cover and under it three boards. The third board back is usually the processor board, it will have a green or yellow battery on it you cant miss. the problem is if you remove the battery with out a plug in battery connected to the board you will lose the machine software and any other saved information. You first need a Part # 32-1010 plug in battery which your dealer should have on hand. Then you can remove the other battery and solder in the new one.
    Could you run on the plug in battery for a while until you can get a new one soldered in?

  4. #4
    JoBwan is offline Aluminum
    Join Date
    Jan 2008
    Location
    Wauseon,Ohio. USA
    Posts
    59

    Default

    Quote Originally Posted by Gmurillo84 View Post
    I do not have a picture but if you open your control cabinet and look to the top left you will see a sheet metal cover and under it three boards. The third board back is usually the processor board, it will have a green or yellow battery on it you cant miss. the problem is if you remove the battery with out a plug in battery connected to the board you will lose the machine software and any other saved information. You first need a Part # 32-1010 plug in battery which your dealer should have on hand. Then you can remove the other battery and solder in the new one.
    Great Info to have...Thanks a million!!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •