I Have a component i need to tap 200 holes in
M3 x 15mm Deep
My old VF0 is the only machine that can repeat(peck) tap without any extra XY moves
the newer machines need an extra X or Y move and another depth eg
T1 M6
G0 G90 G54 X123. Y123. S1000 M3
G43 H1 Z2. M8
G84 G98 R2. Z-5.F500.
X125. Z-10.
X125. Z-15.
G80 Z2.
etc repeat 600 times
Is there a peck tapping cycle or have Haas forgotten to include it in their latest machines
jim
M3 x 15mm Deep
My old VF0 is the only machine that can repeat(peck) tap without any extra XY moves
the newer machines need an extra X or Y move and another depth eg
T1 M6
G0 G90 G54 X123. Y123. S1000 M3
G43 H1 Z2. M8
G84 G98 R2. Z-5.F500.
X125. Z-10.
X125. Z-15.
G80 Z2.
etc repeat 600 times
Is there a peck tapping cycle or have Haas forgotten to include it in their latest machines
jim