What's new
What's new

Bound keyless chuck

Jkirby

Plastic
Joined
Feb 26, 2017
Hope I'm posting In the correct spot. I got this 3 jaw Chuck with some stuff I bought and it was all rusted and bound. I have tried prying it loose to no avail. Any ideas on a way to free he jaws or is this likely scrap. Thanks for any help or advice.
 

Attachments

  • IMG_20170223_131837481.jpg
    IMG_20170223_131837481.jpg
    94.4 KB · Views: 144
  • PicsArt_1488170197603.jpg
    PicsArt_1488170197603.jpg
    67.1 KB · Views: 152
Hope I'm posting In the correct spot. I got this 3 jaw Chuck with some stuff I bought and it was all rusted and bound. I have tried prying it loose to no avail. Any ideas on a way to free he jaws or is this likely scrap. Thanks for any help or advice.

.
.
sometimes hole in side for pin hook spanner wrench
 
Last edited:
There is probably a snap ring holding the knurled ring (scroll) onto a spigot. Remove the retaining ring and try to tap the knurled ring off the back. I suggest a soak in penetrating oil first. I suspect corrosion between the spigot and knurled ring is locking it up. It would have been helpful to see the condition of the chuck before it was grit blasted.
 
Thank you for advice, yes I know I didn't think about it. Lessoned learned for me next time will take a catalog of photos.
 








 
Back
Top