dcsipo
Diamond
- Joined
- Oct 13, 2014
- Location
- Baldwin, MD/USA
Happy New year to you all, first...
Now that i got that out of the way, here is the question. Assume that you have a Kingway with two 2 arc second vials the "V" section is 6" long the post is in the center of the "V" the cross slide is extended so the center of the ball is 10" from the center of the "V". With the 2 Arc second vials one disiion = 0.0002" over 12". The cross vials are indicating the tilt, but i need to calculate the amount of distance at the various touch points. is it safe to assume that one division of the vial parallel to the "V" is 0.0002"*6/12 and the perpendicular vial is 0.0002"*10/12 change? The other question is, would one have to calculate the the drop or rise along the V to the middle point and then calculate the vertical deviation of the ball end from that point?
dee
;-D
Now that i got that out of the way, here is the question. Assume that you have a Kingway with two 2 arc second vials the "V" section is 6" long the post is in the center of the "V" the cross slide is extended so the center of the ball is 10" from the center of the "V". With the 2 Arc second vials one disiion = 0.0002" over 12". The cross vials are indicating the tilt, but i need to calculate the amount of distance at the various touch points. is it safe to assume that one division of the vial parallel to the "V" is 0.0002"*6/12 and the perpendicular vial is 0.0002"*10/12 change? The other question is, would one have to calculate the the drop or rise along the V to the middle point and then calculate the vertical deviation of the ball end from that point?
dee
;-D