jermfab
Cast Iron
- Joined
- Jul 25, 2013
- Location
- atlanta, ga
I need to replace a cracked oil sight glass on my lathe. The lathe is an unmentionable, *cough* Clausing 1300 *cough*, look over there moderator. In any case an unfortunate and freak incident with a heavy piece of stock cracked the glass and the headstock has leaked most of its oil out. The glass looks to measure 3/4”, with the steel retaining ring finishing at .850”. Hoping this is a common size and someone here has a reputable supplier on deck. Thanks for your time and consideration.
Jeremy
Sent from my iPhone using Tapatalk
Jeremy
Sent from my iPhone using Tapatalk