What's new
What's new

FS: 2005 Bridgeport XP#-1000 VMC Fanuc 18i-mb

oldisnew

Aluminum
Joined
Feb 29, 2012
Location
Massachusetts
For sale is a Bridgeport XP3-1000 40" x 24" VMC. The machine has a Fanuc 18I-MB controller,30 position arm type tool changer.
Has set of user manuals. BT40 spindle. Weight 14,750 lbs. Spindle works in low spindle speed range only. Needs spindle speed sensor, gets intermittent
spindle link error on power up( related to sensor issue?). Needs chip conveyor motor. I believe alarm condition can be cleared and machine will functions in low spindle speed range. I believe machine is in otherwise good shape. Was used to machine Aluminum castings. Machine is under power and can be inspected. Located in Hopedale, Ma. This is not my machine, I am listing this machine for the Widow of the machine shop operator(now deceased).
I understand the machine in working condition is $17k to $24K. However, considering the current condition of machine , looking for offers. Machine is on ground level @20 feet from large door. Call me, Ken to discuss, 508-478-7613
 

Attachments

  • DSCN0281.jpg
    DSCN0281.jpg
    53.5 KB · Views: 279
  • IMG_1134.jpg
    IMG_1134.jpg
    95.6 KB · Views: 322
  • IMG_1135.jpg
    IMG_1135.jpg
    96.5 KB · Views: 348
  • IMG_1136.jpg
    IMG_1136.jpg
    100.4 KB · Views: 218
  • IMG_1139.jpg
    IMG_1139.jpg
    87.8 KB · Views: 225
Machine has been sold to PM member Matthewlee. Initial troubleshooting indicates the a relay and a contactor are suspect. Swapped the relay and spindle errors went away. The contactor seems to have a bad actuating coil, so no high speed range until coil is replaced.
 








 
Back
Top