ewlsey
Diamond
- Joined
- Jul 14, 2009
- Location
- Peoria, IL
This is a Cincinnati Toolmaster slotting attachment. As far as I know, this is functionally equivalent to the Bridgeport slotting attachments.
It works. I have used it. Tool clamp is there. It has a V type clamp designed to hold round shank slotting tools just like the Bridgeport. 4" maximum stroke. The stroking part can swivel 360 degrees to cut any angle you want. The tool clamp also swivels a few degrees if needed.
This was originally designed to clamp on the dovetail ways of the ram on the Toolmaster mills. It has an adapter to clamp in the round lug at the back of the ram. It is mounted to a Lagun FTV-2 in the pictures.
3 phase. It has a drum switch that is a little beat up, but does work. The heaters are missing though, so you will need a proper motor heater/starter to safely use it (or VFD I guess).
There should be some kind of tool with a small gear on the end to adjust the stroke, but it is missing. It's not hard to adjust without it. A replacement could be made pretty easily.
$600. I can ship via freight if required. Local pickup in East Peoria, IL would be better.
Contact me by email at [email protected]
It works. I have used it. Tool clamp is there. It has a V type clamp designed to hold round shank slotting tools just like the Bridgeport. 4" maximum stroke. The stroking part can swivel 360 degrees to cut any angle you want. The tool clamp also swivels a few degrees if needed.
This was originally designed to clamp on the dovetail ways of the ram on the Toolmaster mills. It has an adapter to clamp in the round lug at the back of the ram. It is mounted to a Lagun FTV-2 in the pictures.
3 phase. It has a drum switch that is a little beat up, but does work. The heaters are missing though, so you will need a proper motor heater/starter to safely use it (or VFD I guess).
There should be some kind of tool with a small gear on the end to adjust the stroke, but it is missing. It's not hard to adjust without it. A replacement could be made pretty easily.
$600. I can ship via freight if required. Local pickup in East Peoria, IL would be better.
Contact me by email at [email protected]