jljim
Cast Iron
- Joined
- Jul 24, 2004
- Location
- Northwest Ohio
14" swing over bed, 6" over cross slide. 3hp variable speed Reeves drive, 220v, 3ph. 4 speed power feed to 6 position turret. 180 rpm back gear to 1800 max. Hole through spindle 1 9/32, push bar for collet operator is stuck in spindle. Lever operated cross slide, hand wheel feed to carriage. Contractor box is probably original, should be replaced. I just wired the motor direct to test run. Coolant sump in base, no pump. It has a couple cracked/broken feet, see pics. Head stock and turret gearing in good condition. Has a Packard Motor Co. Property tag. The turret takes W/S #2 tooling, the collet nose for the spindle also used #2 W/S collets. The spindle flange looks like it would take an A1-5 chuck. Weighs 2375 lbs. Asking 400.00 or make an offer please. I rescued this, and several other machines, back when scrap prices were crazy high. Fork lift loading is free. PM or shop phone is 419 533 eight four six two.