TeflonDave
Aluminum
- Joined
- Sep 9, 2009
- Location
- NY, USA
Mazak Model: QSH-10 Year: 1985 Serial Number: 60392 - Pics @ link below
To the best of my knowledge and by the book here goes;
Specs: Control: Mazatrol Cam-T4 CNC Control, Meldas-YT4H, Yamazaki
Max Swing: 12.6"
Chuck Size: 6" 3-Jaw
Max Turning Diameter: 6.69" Upper / 4.33" Lower Turrets
Max Turning Length: 20.00"
Turret 1 Capacity: 8 Stations
Turret 1 Travels: 5.12" x / 21.65" Z
Turret 2 Capacity: 8 Positions
Turret 2 Travels: 3.35" X / 21.65" Z
Spndle Nose: A2-5"
Spindle Speeds: 100 - 6,000 RPM
Bar Capacity (Hole Thru Draw Tube):1.25”
Programmable Tailstock: Manual Hydraulic Tailstock
Tailstock Travel: 20.28" Travel
Spindle Drive: 10 / 7.5 HP
Equipped With: Mazatrol CAM T-4 CNC Control, (2) 8 Station Turrets (Upper and Lower), Tailstock, Assorted Turret Tooling, 6" 3-Jaw Chuck, Remote Foot Trip For Chuck, Manuals.
Electrics: 220 Volt, 3 Phase
Main Unit Approx Weight: 7040 lbs
Main Unit Dimensions (in inches): Length: 116" Width: 61" Height: 76"
Chip Pan: L: 59" W: 24" H: 17" Weight: 100 lbs\
Comes with boring tool holders and turning tool clamping systems, manuals and original parameters list, maintenance/repair log is available.
This machine is a fixer upper for the right person/shop. The beast is asleep right now and we have run out of time to repair it. We have a new machine arriving early December and need to free up floor space for fabrication & production. The machine needs some repair and re-initializing . We will have a rigger here for the new machine so it can be coordinated to load this one on your flat bed. Please note: a good rigger is needed to handle this machine. $1200.00 takes it OBO considered.
The link goes to photos
PM me with any questions
Mazak QSH-1 - Google Photos
To the best of my knowledge and by the book here goes;
Specs: Control: Mazatrol Cam-T4 CNC Control, Meldas-YT4H, Yamazaki
Max Swing: 12.6"
Chuck Size: 6" 3-Jaw
Max Turning Diameter: 6.69" Upper / 4.33" Lower Turrets
Max Turning Length: 20.00"
Turret 1 Capacity: 8 Stations
Turret 1 Travels: 5.12" x / 21.65" Z
Turret 2 Capacity: 8 Positions
Turret 2 Travels: 3.35" X / 21.65" Z
Spndle Nose: A2-5"
Spindle Speeds: 100 - 6,000 RPM
Bar Capacity (Hole Thru Draw Tube):1.25”
Programmable Tailstock: Manual Hydraulic Tailstock
Tailstock Travel: 20.28" Travel
Spindle Drive: 10 / 7.5 HP
Equipped With: Mazatrol CAM T-4 CNC Control, (2) 8 Station Turrets (Upper and Lower), Tailstock, Assorted Turret Tooling, 6" 3-Jaw Chuck, Remote Foot Trip For Chuck, Manuals.
Electrics: 220 Volt, 3 Phase
Main Unit Approx Weight: 7040 lbs
Main Unit Dimensions (in inches): Length: 116" Width: 61" Height: 76"
Chip Pan: L: 59" W: 24" H: 17" Weight: 100 lbs\
Comes with boring tool holders and turning tool clamping systems, manuals and original parameters list, maintenance/repair log is available.
This machine is a fixer upper for the right person/shop. The beast is asleep right now and we have run out of time to repair it. We have a new machine arriving early December and need to free up floor space for fabrication & production. The machine needs some repair and re-initializing . We will have a rigger here for the new machine so it can be coordinated to load this one on your flat bed. Please note: a good rigger is needed to handle this machine. $1200.00 takes it OBO considered.
The link goes to photos
PM me with any questions
Mazak QSH-1 - Google Photos