PegroProX440
Hot Rolled
- Joined
- Mar 7, 2012
- Location
- Ormond Beach
We just purchased a 2000 Makino SNC64 from an auction. The riggers did a terrible job with labeling of wires and hoses when they disconnected everything. I cannot find any info in my manuals either. So on the left side of the machine there is a panel that comes off and inside there is a cluster of pumps on top of a reservoir that rolls out on wheels. Does any one have any information on what hose goes to what.
I tried to hook it up based on various clues on the hoses such as bends and lengths. I am pretty sure I have it wrong. After the initial start up Oil started coming out of the spindle at a decent rate, and the pumps got loud like they were overloading. I killed it immediately to prevent any further damage.
Obvious answer would be call a tech to come hook it up, I did and they are giving me a timeline of late July. Is this what I am to expect from Makino in Massachusetts?
I tried to hook it up based on various clues on the hoses such as bends and lengths. I am pretty sure I have it wrong. After the initial start up Oil started coming out of the spindle at a decent rate, and the pumps got loud like they were overloading. I killed it immediately to prevent any further damage.
Obvious answer would be call a tech to come hook it up, I did and they are giving me a timeline of late July. Is this what I am to expect from Makino in Massachusetts?