Tony Quiring
Titanium
- Joined
- Nov 5, 2008
- Location
- Madera county california usa
We need to build a couple brackets that will require us using 8 inch aluminum channel but only need a couple lengths of 7 inches.
We need 3 7 inch lengths at this time, shipped to central CA.
Our local sources are only full 25 foot lengths so we are looking to see if there are any folks who may have some remnants, drops or leftovers that could sell them to us.
They would need to be able to take plastic as that is how we pay.
What we need can be similar to, but does not need to be exactly this,
American Standard 6061-T6
found at this link
http://coastaluminum.com/wp-content/uploads/pdfs/12 Aluminum Channel 6061 American Standard.pdf
Part number 8CAS303
The material needs to be the 8 inch channel but the wall thickness can be just about any of the available units with the above being the preferred.
Please use PM to follow up or post here if the PM does not work.
We need 3 7 inch lengths at this time, shipped to central CA.
Our local sources are only full 25 foot lengths so we are looking to see if there are any folks who may have some remnants, drops or leftovers that could sell them to us.
They would need to be able to take plastic as that is how we pay.
What we need can be similar to, but does not need to be exactly this,
American Standard 6061-T6
found at this link
http://coastaluminum.com/wp-content/uploads/pdfs/12 Aluminum Channel 6061 American Standard.pdf
Part number 8CAS303
The material needs to be the 8 inch channel but the wall thickness can be just about any of the available units with the above being the preferred.
Please use PM to follow up or post here if the PM does not work.