adh2000
Titanium
- Joined
- Dec 21, 2005
- Location
- Waukesha, WI
Need 4 pieces:
1.062" OD, 0.090 wall. I'll probably have to buy 1.125 with thicker wall and turn it down to 1.062. I can provide the material.
First 10" are straight, then it tapers down to 0.750 over the next 16". Uniform taper. Total length is 26".
Material is 4130 seamless steel tube.
Rotary swaging would be best, but tooling costs are a problem for only 4 pieces. Maybe someone has dies. Open to other manufacturing methods. I've considered turning from solid and step drilling the ID, but so far rejected that.
1.062" OD, 0.090 wall. I'll probably have to buy 1.125 with thicker wall and turn it down to 1.062. I can provide the material.
First 10" are straight, then it tapers down to 0.750 over the next 16". Uniform taper. Total length is 26".
Material is 4130 seamless steel tube.
Rotary swaging would be best, but tooling costs are a problem for only 4 pieces. Maybe someone has dies. Open to other manufacturing methods. I've considered turning from solid and step drilling the ID, but so far rejected that.