Flute Maker
Cast Iron
- Joined
- Feb 17, 2007
- Location
- Needham, MA
Hi everyone,
We need two (2) sizes of aluminum washers made. I don't have the exact specs here at home. I just now thought to put it out here. I can tell you they are 17mm & 18.5mm D, by about .5mm , with about a .250"+ hole, burr free. I think they would benefit from clear anodizing. Number of parts could be 5,000 of the 17mm, and 2,000 of the 18.5mm. They need to be very flat, and one side has about a 35deg (not critical) relief, down to half it's thickness maybe, out to the edge, on one side. I'll post complete specs in the morning tomorrow / Monday.
Please give it a look.
Thanks,
Payson.
We need two (2) sizes of aluminum washers made. I don't have the exact specs here at home. I just now thought to put it out here. I can tell you they are 17mm & 18.5mm D, by about .5mm , with about a .250"+ hole, burr free. I think they would benefit from clear anodizing. Number of parts could be 5,000 of the 17mm, and 2,000 of the 18.5mm. They need to be very flat, and one side has about a 35deg (not critical) relief, down to half it's thickness maybe, out to the edge, on one side. I'll post complete specs in the morning tomorrow / Monday.
Please give it a look.
Thanks,
Payson.