What's new
What's new

RFQ - partially threaded studs

Jay Fleming

Hot Rolled
Joined
Aug 7, 2014
Location
Noble, OK
I'm looking to get a quote for the following studs:

Qty 100 and 500
3/8-16-2A
Thread length .700"
OAL 1.000"
45* x .030" chamfer on threaded end
Minimal chamfer on plain end to break sharp edge

Qty 60 and 300
7/16-20-2A
Thread length .825"
OAL 2.610"
45* x .030 chamfer on both ends

Plain end on both studs to be same diameter as major diameter of threads.

Thread length tolerance +/- .010"
OAL tolerance +/- .010"
Material: Alloy Steel, Grade 5 or better yield strength

Basic representation below.

PM Quotes with shipping to 73069.

Call me selfish, but I will not accept quotes from anyone who does not have a history on here.

Thanks.

Jay

Studs.JPG
 
A few clarifications:

If the stock has to be turned down, surface finish must be 63 Ra or better. Otherwise if nominal size stock is used, mill finish is fine.

Disregard the thread length tolerance. The tapped holes are that deep or a little more. The plain end length is more critical. On the 3/8, .300 is the plain end length. On the 7/16, 1.785 is the plain end length. These are +/- .010 if it's achievable.

Parting tool finish is fine on the ends. No parting tit though.

Sent from my HTC One using Tapatalk
 
Sent quote to your email.

Thank you for the opportunity,
Arete Precision Machining

Sent from my SAMSUNG-SM-G930A using Tapatalk
 








 
Back
Top