Hi All,
I've been looking for a shop in Brooklyn to make the attached part. I reached out to a number of shops but no one seems interested.
I'd be happy to work with someone further away than Brooklyn also.
I'd initially like two of the attached part, and then will likely need 5 or so more.
Please let me know if you're interested or would like additional information.
The tolerances on the ends of the tubing need to be reasonably tight, the rest is loose. If you have an issue with anything specific I'm happy to discuss. I'll need to feed a wire down the tubing so it can't be obstructed.
I've been looking for a shop in Brooklyn to make the attached part. I reached out to a number of shops but no one seems interested.
I'd be happy to work with someone further away than Brooklyn also.
I'd initially like two of the attached part, and then will likely need 5 or so more.
Please let me know if you're interested or would like additional information.
The tolerances on the ends of the tubing need to be reasonably tight, the rest is loose. If you have an issue with anything specific I'm happy to discuss. I'll need to feed a wire down the tubing so it can't be obstructed.