Rush job RFQ Simple milled 1018 bars

T

The Extractor

Cast Iron

Joined

Dec 17, 2010

Location

Western CO

• Apr 11, 2017

• #1

Hi all, we are in need of these 1018 cold rolled bars asap.

They need a simple notch milled in them lengthwise.

Ignore the lengths on the drawing.

2 different sizes.

tolerance +/- .015

2 Pcs @ 6 foot of the 1x1.5 top dwg

1 Pcs @ 6 foot of the 1x.625 bottom dwg

Please include your time frame in the quote.

You can supply the mtl or we can buy it and have it shipped directly to you.

 

Last edited: Apr 11, 2017

J

Johnny SolidWorks

Hot Rolled

Joined

Apr 2, 2013

Location

Rochester

• Apr 11, 2017

• #2

Just to make sure I'm following:

You need QTY 1 of the top part in the print, 6 feet long?

And QTY 2 of the bottom part in the print, 6 feet long?

The prints call out 11 feet long for the top part, and 5 feet long for the bottom part - just want to make sure I understand what you're asking for.

I'm assuming the ±.015" doesn't apply to straightness? Stock sizes OK on everything but the milled step?

 

T

The Extractor

Cast Iron

Joined

Dec 17, 2010

Location

Western CO

• Apr 11, 2017

• #3

2 Pcs @ 6 foot of the 1x1.5 top dwg

1 Pcs @ 6 foot of the 1x.625 bottom dwg

 

pianoman8t8

Hot Rolled

Joined

Nov 14, 2012

Location

Maine, USA

• Apr 11, 2017

• #4

"Ignore the lengths on the drawing."

 

R

ronf

Cast Iron

Joined

Aug 1, 2006

Location

montana

• Apr 11, 2017

• #5

Looks like a good job for a horizontal mill if you could find one in your area.

 

M

ManualEd

Stainless

Joined

Oct 13, 2014

Location

Kelowna, Canada

• Apr 11, 2017

• #6

This might be a dumb question, but is the 1⅝ dimension in the first drawing a typo?

 

T

The Extractor

Cast Iron

Joined

Dec 17, 2010

Location

Western CO

• Apr 11, 2017

• #7

ManualEd said:

This might be a dumb question, but is the 1⅝ dimension in the first drawing a typo?

Click to expand...

I that got pulled from another part of the drawing. I didnt make the drawings.

 

T

The Extractor

Cast Iron

Joined

Dec 17, 2010

Location

Western CO

• Apr 11, 2017

• #8

Johnny SolidWorks said:

Just to make sure I'm following:

You need QTY 1 of the top part in the print, 6 feet long?

And QTY 2 of the bottom part in the print, 6 feet long?

The prints call out 11 feet long for the top part, and 5 feet long for the bottom part - just want to make sure I understand what you're asking for.

I'm assuming the ±.015" doesn't apply to straightness? Stock sizes OK on everything but the milled step?

Click to expand...

Ignore the lengths on the print.

You have the quantity's mixed up.

2 Pcs @ 6 foot of the 1x1.5 top dwg

1 Pcs @ 6 foot of the 1x.625 bottom dwg

Correct, NOT to straightness.

Stock sizes are what we want.

 

B

BSCustoms

Cast Iron

Joined

Dec 29, 2014

Location

WA

• Apr 12, 2017

• #9

straightness or flatness callout?

This thing is going to come back and touch itself when you knock the ditch out.

 

T

The Extractor

Cast Iron

Joined

Dec 17, 2010

Location

Western CO

• Apr 12, 2017

• #10

True but we can do the straightening.

ALL the job has been awarded.

RFQ closed! Thank you all!