Chevy427z
Stainless
- Joined
- Oct 12, 2004
- Location
- Clinton, North Carolina
Hows does block skip work on a Mazatrol Matrix Nexus 2?
Hi folks.
I know how to use block skip in a Fanuc based system, and can make mine work in EIA mode.
When I select "block skip" on the soft keys, I get a new page listing block skip 1, block skip 2, etc...
I would like to block skip multiple lines, say for a spot drill, while I test the next drill cycle, without putting fore slashes in front of every line.
Many thanks!
Mark
edited: replaced "delete" with "skip" sorry for the confusion!
Hi folks.
I know how to use block skip in a Fanuc based system, and can make mine work in EIA mode.
When I select "block skip" on the soft keys, I get a new page listing block skip 1, block skip 2, etc...
I would like to block skip multiple lines, say for a spot drill, while I test the next drill cycle, without putting fore slashes in front of every line.
Many thanks!
Mark
edited: replaced "delete" with "skip" sorry for the confusion!
Last edited: