Mazatrol T-2 threading question

Gobo · Nov 20, 2017

T-2 control. On my thread out cycle, no matter what the value I input for the depth of the first cut, it does not change. Whaddup?

kevin66 · Nov 21, 2017

Gobo said:
T-2 control. On my thread out cycle, no matter what the value I input for the depth of the first cut, it does not change. Whaddup?

Dont have a T2 but on our T1 its pretty much the same thing as you describe. You are pretty much at the controls mercy. The only thing that makes any depth per pass adjustment is the number of cutting passes but that is a crap shoot at best.

Gobo · Nov 21, 2017

kevin66 said:
Dont have a T2 but on our T1 its pretty much the same thing as you describe. You are pretty much at the controls mercy. The only thing that makes any depth per pass adjustment is the number of cutting passes but that is a crap shoot at best.

I have looked at every parameter, and nothing seems applicable. The only thing I found pertains to EIA. Cant find the programming manual, I was hoping it might help.

benganboll · Nov 21, 2017

http://hagstromsystems.se/_Files/MazakQT10N1986OperatingManual_T2.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986ProgramingManual_MazatrolCam_T-2PracticalUse.pdf
http://hagstromsystems.se/_Files/MazakQT10N1986ProgramingManual_MazatrolCam_T-2Primer.pdf

Gobo · Nov 21, 2017

Awesome! thanx

Search

Largest Manufacturing Technology Community on the Web

Search

Mazatrol T-2 threading question

Gobo

Titanium

kevin66

Aluminum

Gobo

Titanium

benganboll

Hot Rolled

Gobo

Titanium

Similar threads