novation1
Plastic
- Joined
- Apr 3, 2017
- Location
- Columbia Station, Ohio USA
Need help with a QT-8
Hi Everyone,
I got this machine a couple of months ago and have been slowly getting it back together. It was missing parts. Some visible and some not so visible. Anyway I finally got it under power and have been trying to get rid of the errors that are showing up on the monitor. I'll attach pictures of the diagnostic screen and all the parameters that I have put in. I don't have any of the hidden parameters. I have the wiring book, maintenance manual, operation manual and a list of parameters specific to this machine but no hidden parameters unless I missed them somewhere. The control seems to think that there is a tailstock but the machine has a sub spindle. It also says there are illegal parameters. Not sure where to go from here. I contacted Mazak today about the parameters. They said I needed to register the machine first before they could give me any information. They say they have a generic set of parameters for the QT8. If I wanted the parameters for this machine it would be $500. Not sure the generic parameters will have the hidden parameters or not. If anyone knows that would be helpful. Some errors are in a blue background and some are not. The spindle drive seems to be ready showing "r-0", and the dual drive is showing B1-B2 on the LED readout. The only thing that seems to be functioning is the chuck will open and close. Any help would be appreciated.
Hi Everyone,
I got this machine a couple of months ago and have been slowly getting it back together. It was missing parts. Some visible and some not so visible. Anyway I finally got it under power and have been trying to get rid of the errors that are showing up on the monitor. I'll attach pictures of the diagnostic screen and all the parameters that I have put in. I don't have any of the hidden parameters. I have the wiring book, maintenance manual, operation manual and a list of parameters specific to this machine but no hidden parameters unless I missed them somewhere. The control seems to think that there is a tailstock but the machine has a sub spindle. It also says there are illegal parameters. Not sure where to go from here. I contacted Mazak today about the parameters. They said I needed to register the machine first before they could give me any information. They say they have a generic set of parameters for the QT8. If I wanted the parameters for this machine it would be $500. Not sure the generic parameters will have the hidden parameters or not. If anyone knows that would be helpful. Some errors are in a blue background and some are not. The spindle drive seems to be ready showing "r-0", and the dual drive is showing B1-B2 on the LED readout. The only thing that seems to be functioning is the chuck will open and close. Any help would be appreciated.
Attachments
Last edited: