simplynewt
Plastic
- Joined
- Apr 25, 2018
We have this Laser and the operators seem to be going through a bunch of expensive Tracer Cables. Testing them with an Analog Meter, they test fine from end to end and from end to ground.
Could the issue they are experiencing be from the longer cable.that runs to the amp or could it be at the Coupling where the longer cable and Tracer Cable are joined together?
There are no broken ceramics so that can be disregarded as a possible cause.
Thanks for the replies.
Could the issue they are experiencing be from the longer cable.that runs to the amp or could it be at the Coupling where the longer cable and Tracer Cable are joined together?
There are no broken ceramics so that can be disregarded as a possible cause.
Thanks for the replies.