Hi,
We currently have a turning machine with Fanuc 18Oi control. We have measured the positional error in the machine in each axis using laser interferometer. Now we want to do the pitch error compensation but the problem we are facing is that the pitch compensation table is not available in the controller. Pitch compensation parameters like 3620, 3621, 3622 etc are available in the controller but the pitch compensation table (which we normally access by pressing SYSTEM key followed by pressing next menu key and then followed by PITCH soft key) is not available.
Any help in this regard will be highly appreciable.
Regrads
Awais
We currently have a turning machine with Fanuc 18Oi control. We have measured the positional error in the machine in each axis using laser interferometer. Now we want to do the pitch error compensation but the problem we are facing is that the pitch compensation table is not available in the controller. Pitch compensation parameters like 3620, 3621, 3622 etc are available in the controller but the pitch compensation table (which we normally access by pressing SYSTEM key followed by pressing next menu key and then followed by PITCH soft key) is not available.
Any help in this regard will be highly appreciable.
Regrads
Awais
Last edited: