derikOQIsolution
Plastic
- Joined
- Apr 6, 2018
All,
I have the supermic in the attached picture. The issue is the display is stuck at one value. Hit the reset switch and move the spindle the readout stays at 0. Hit preset and the same issue. Has anyone had this happen or know what to look for? Unplugging did not solve anything. Before i unplugged it the last digit would stay at 1 or 4 while all other numbers would change when i turned the spindle. After unplugging none of the numbers would change with the spindle.
Thank you,
Derik Flairty