guythatbrews
Titanium
- Joined
- Dec 14, 2017
- Location
- MO, USA
I just got a 1955 10EE sn 40551. Advertised as 208v 3 ph working condition. First thing I saw when I when I took off the cover was a beautiful brass nameplate marked 440V. I had kinda planned on the drive not working since this thing was stored for a long time so no worries. I started removing wires from the terminal studs being careful they were well marked. All had factory markings and seemed to match the tags on the terminal studs. Anyway long story short it IS a 208v machine so the 440v tag is wrong. After some cleanup back the wires go. Except I have 2 extra wires with no home! Outsmarted myself again! I aquired drawing EE-3216 and have seen EE-3218 but these both have reliance control 6299H15A noted on the drawing and the wires are marked a little differently, as are the terminal studs. My exta wires are marked "GR" and "F1" and I have a terminal stud marked "GR1" that doesn't have a corresponding wire. I've searched the forum but can't find what I need. Anybody know where i can get my hands on the drawing showing 6299H15C? Thanks!