DDYTDY
Aluminum
- Joined
- Jul 7, 2005
- Location
- Methuen, MA.
Greetings,
I have a 1943, serial number 24727 10EE.
Ran fine for years but it just started giving me trouble.
The attached contact is normally closed, but its jumped. It has continuity on both sides open or closed.
I can start the machine dialed down to it's slowest speed but if I increase the speed the mag coil cycles and breaks/starts the control circuit. (see youtube video)
video 151276 469 - YouTube
If I disconnect the coil I can run the machine to full speed. Manually opening the contact breaks the control circuit without that cycling.
Thanks for any help.
Ray
I have a 1943, serial number 24727 10EE.
Ran fine for years but it just started giving me trouble.
The attached contact is normally closed, but its jumped. It has continuity on both sides open or closed.
I can start the machine dialed down to it's slowest speed but if I increase the speed the mag coil cycles and breaks/starts the control circuit. (see youtube video)
video 151276 469 - YouTube
If I disconnect the coil I can run the machine to full speed. Manually opening the contact breaks the control circuit without that cycling.
Thanks for any help.
Ray