TomBoctou
Hot Rolled
- Joined
- Dec 29, 2007
- Location
- Boston, MA, USA
Model 60 - 18.5 x 30, Free - Boston area
I'm clearing out a bunch of stalled projects, so hopefully my loss is your gain.
This is an 18.5 x 30 Monarch model 60, in pretty good shape - very nice ways. I got it from someone who decided to "restore" it, took some bits apart, stripped off the paint, and left it to sit until they lost their space, so I got it. I'm unwilling to sell it for scrap, so here it is.
It's complete, with taper attachment. Everything is there and in good shape, just some assembly needed. Only small(ish) stuff is apart - tailstock, parts of the carriage, taper attachment, etc. The headstock is intact. I did some cleaning, changed the headstock oil, made sure the oiling system worked, etc.
D1-8 spindle. Needless to say, chuck or other tooling not included.
5 hp 208 3ph motor. It's around 6000 lbs and can be handled by a tiltback car carrier.
I'm clearing out a bunch of stalled projects, so hopefully my loss is your gain.
This is an 18.5 x 30 Monarch model 60, in pretty good shape - very nice ways. I got it from someone who decided to "restore" it, took some bits apart, stripped off the paint, and left it to sit until they lost their space, so I got it. I'm unwilling to sell it for scrap, so here it is.
It's complete, with taper attachment. Everything is there and in good shape, just some assembly needed. Only small(ish) stuff is apart - tailstock, parts of the carriage, taper attachment, etc. The headstock is intact. I did some cleaning, changed the headstock oil, made sure the oiling system worked, etc.
D1-8 spindle. Needless to say, chuck or other tooling not included.
5 hp 208 3ph motor. It's around 6000 lbs and can be handled by a tiltback car carrier.
Attachments
Last edited: