rke[pler
Diamond
- Joined
- Feb 19, 2002
- Location
- Peralta, NM USA
As long as I'd dialed in the taper to 12 Jarno I figured that I'd do a little more taper turning. Here's some of the results:
From right to left there's a spindle stop for use with chucks, it has a 3/8-16 thread through for a threaded stop; then there's an MT3 adapter and finally a blank for whatever I want to make in the future. The MT3 adapter is made a little long for a face driver that I have and it's the rest of the 4140HT chuck I used for the indexing faceplate long center. The others are made from 1144.
From right to left there's a spindle stop for use with chucks, it has a 3/8-16 thread through for a threaded stop; then there's an MT3 adapter and finally a blank for whatever I want to make in the future. The MT3 adapter is made a little long for a face driver that I have and it's the rest of the 4140HT chuck I used for the indexing faceplate long center. The others are made from 1144.