What's new
What's new

ID clamping no control light osp7000L

mkd

Stainless
Joined
Jun 8, 2013
Hi guys,
Trying to do some ID chuck clamping.
I switched the parameter from 0 to 1 but the in position light on the control panel never activates. All seems well with the limit switch, as I even tried different positions with red and green prox-switch lights working fine.
No problems with OD chucking.
Thanks
 
Local tech was equally mystified.
he's not that familiar with older single limit switch logic. Newer lathes have dual switches.
certainly seems like the control is looking for some other input. Seems like pressure is pressure no matter which way the chuck is going?
got a call into south carolina... meanwhile the machine sits. it's killin me.:ack2:
 
OMG. Turns out (im an idiot) there was a second limit switch I've never needed to use for OD chucking.
In switching to ID chucking the control reverses purposes of the switches which requires adjustment of the one I've never touched or even looked at.
#facepalm##:nutter:
 








 
Back
Top