I have acquired an old LB10 and I’m not sure the way lube is functioning. I found two loose oil lines to the saddle and they have air in them. I have tightened them up but they still have air in them. I have tried the instructions to forcibly pump oil through the system but it doesn't seem to do much and they still have air. Are there any ways to check the system?
The control box has also been modified with a two handed cycle start which is annoying. I don’t have wiring diagrams and I’m unfamiliar with this control. What button should action midi commands?
Attached is a picture of the control. The cycle start on the left has no effect on midi or automatic programs. The one on the right is unlabelled and I’m unsure of what it is for and it has no effect on the cycle but the wires are labelled similarly.
The control box has also been modified with a two handed cycle start which is annoying. I don’t have wiring diagrams and I’m unfamiliar with this control. What button should action midi commands?
Attached is a picture of the control. The cycle start on the left has no effect on midi or automatic programs. The one on the right is unlabelled and I’m unsure of what it is for and it has no effect on the cycle but the wires are labelled similarly.