jdgarner13
Plastic
- Joined
- Nov 7, 2014
When I try to tool change to a designated large diameter tool I get an alarm 2715, Wrong T command, 15. The alarm description page explains that the tool pot cannot accept large diameter tools. We have ran this same tool in the same pot for a very long time. This issue just started. The tool\pot data page shows that the pot in question is noted as a large diameter and heavy tool. The two pots above and below are both designated as dummy tools. I took the tool out of the magazine and changed the designation and the atc worked fine. I cannot figure out what the cause nor the solution is. Can anyone offer some advice?