I am using a Janome SCARA robot to spray coat revolved parts as they spin on a lathe. Ideally the robot would slow down during a line dispense so I could get even coverage from the inner to outer diameter. Does anyone know how to do that? When i change acceleration it just slows the robot down for all but the dispense moves.
I understand this is a basic question... I have never needed to know before as the previous parts had enough features that I had make separate motion profiles for different radial segments which also hides the tapered coating.
Thanks
I understand this is a basic question... I have never needed to know before as the previous parts had enough features that I had make separate motion profiles for different radial segments which also hides the tapered coating.
Thanks