f/s Armstrong boring bar holder
f/s Armstrong boring bar holder,# 1-B, 3" OD,3- 5/16"HIGH, takes 1/2"-3/4" and 1+1/8"bars.
Set up now at approx 1-1/2" center height. T-BOLT 2-1/8"wide x 3/8" thick x 3-1/8" long
with a 1-1/8"X16" Armstrong bar 90°+ 45° uses 3/8"sq. tools. and the 1 1/4" Armstrong
#1808 chrome wrench,
Exceptionly clean, no rust, shiny as a dime, one small rub mark from chuck.
$50.00 +flat rate dave [acme thread]
Missing the two small springs, that keeps the cap open, I'LL have to look around, got a whole box of assorted springs somewhere.
|
Linear Mode
