VQC 20/40 with M2 lost parameters

[Empireweld]

I lost the parameters on my VQC due to a dead battery, now need to restore.
I have what i believe is all the parameters. I just need a link to the procedure to wipe out the
corrupted params and the best way to restore them. I had seen a pdf file on the Mits site at one time but can't find it.

Thanks
Doug Walker

[Debco Machinery]

I have it in the manual, so if you don't find a link let me know.
Its in the shop.

Dave

[Debco Machinery]

http://meau.com/Files/M2_M2A_RAM_INIT_PROC.PDF

[Empireweld]

I tried the procedure on the mits site, but I believe that is for a meldas m2 control.
I guess I should of said it is a Mazatrol CAM M2. I could only get to two diagnosis screens.

[Empireweld]

Got the parameters back in, and past the checksum error. Now I cant get past the X axis
ballscrew pitch correction table to the y,z,and 4th. I've been there before but can't remember how. Does anyone know or have a list of the actual function of the parameters?
My machine was bought new with an M1 and later upgraded to a M2 so I have two sets of
parameters. In one table all the #s matched those that I had hardcopies for except the last 3
and they didn't appear to be corrupted like many in the other tables.

[Debco Machinery]

I may have it at the office, I am in socal so am close if you need to pick something up.

Dave

[Empireweld]

I'm still looking for a list of parameters. Any help would be appreciated.

Doug

[Mark McGrath]

Doug,
replied to your PM but PM won`t accept your user name for some reason.
I will try again from here but need your email address in order to send file.
Mark.