Halligan
Aluminum
- Joined
- Oct 6, 2011
- Location
- Massachusetts
Well Started the process of converting the crosslide from the stock small dials to large dials. since the feed screw needs to be modified anyway I resized the handle side shaft to be 1/2" instead of 5/8" so I can use a standard off the shelf bearing between the bushing and the gear on the shaft. I completed the bushing so far and have also made up a model and some plans for anyone interested in doing the conversion. I will be posting my progress and some videos in this thread as I go along.
Drawings can be found here: SB13
Drawings can be found here: SB13