Results 1 to 20 of 25
08-01-2010, 09:05 AM #1
Half nut repair and FREE crossfeed nut
Shop is slow again so Im looking for work. Im going to have deal for PM members only on my halfnut rebuild repair. My normal ebay price is now $95 for the repair alone. For the months of aug and sept im going to offer the rebuild and a crossfeed leadscrew nut for $80 with shipping. This is for south bend 9", heavy 10s, and logan 10 and 11" lathes. If you have an atlas 10 or 12 lathe I have New brass halfnuts,crossfeed nut for $85. If you have any questions feel free to call or text me at 913 636 6107. Thanks Mike
08-01-2010, 09:14 AM #2
pics of repaired halfnuts
here are a couple pics of repaired halfnuts.
08-01-2010, 10:21 AM #3
Jawyhawkman did the work on my cross slide and compound and the results were amazing. Backlash was almost 0. +1 for his work.
08-10-2010, 07:59 PM #4
Crossfeed nut for a 16/24
Do you make any cross feed nuts for SB 16 and 16/24's?
08-11-2010, 11:57 AM #5
16" crossfeed nuts
Yes I rebuild the halfnuts on 16s and make both the crossfeed and compound nuts for that machine. Give me a call or text at 913 636 6107 and I can give you a quote. Thanks Mike
08-26-2010, 01:26 PM #6
08-26-2010, 06:28 PM #7
Cross Slide Screw Rebuild
Jayhawkman also just finished a cross slide (screw and nut) rebuild for me. Finally put it back together and its SO much nicer than the original. I'm very happy with the work.
08-27-2010, 11:38 AM #8
09-07-2010, 02:33 PM #9
09-19-2010, 02:43 PM #10
09-23-2010, 03:09 PM #11
If anyone has any south bend 9" or logan halfnuts I am needing some cores. Please give me a call or text at 913 636 6107. Thanks Mike
09-28-2010, 04:23 AM #12
Just sent you a text re: 10L half nuts.
10-09-2010, 11:56 AM #13
10L half nut rebuild
Just received rebuilt 10L half nuts from jayhawkman. They look great. Thanks for the quick turnaround, Mike.
10-09-2010, 01:13 PM #14
I have been asked about the timeline of this offer. Im not as slow as I was a couple of months ago but still could use the work so I will hold this offer as long as you guys keep it on the first page. I really like this repair as it gives you alot of bang for your buck and puts work in my shop. Thanks Mike
10-11-2010, 05:37 PM #15
How involved is it to remove the apron on a 10 " Heavy? (10R). Does it drop down and slide off along the screw or do I need to take off the whole carriage.
10-12-2010, 04:05 AM #16
Half nuts repair
How about doing the ones for the 13 South Bend
11-07-2010, 09:50 AM #17
Mike, what is your current price for the half nuts for a 10L ?
02-06-2011, 09:52 PM #18
02-07-2011, 03:52 AM #19
I'm not the one that does the repair but later on I too will be interested in this service.
02-07-2011, 01:45 PM #20
You can call or text me at 913 636 6107 for current pricing on parts and repairs. Thanks Mike