Hammerfest
Aluminum
- Joined
- Sep 12, 2010
- Location
- NW US
Gents--the potential attachment points for a DRO for the Carriage and Cross Feed are probably pretty limited to the back side of the bed and the right side of the Cross Feed but I thought I would ask if anyone has had experience and found a good location. I plan to make custom hangers for the back side of the bed that will clamp to the Vee and hang down. The Cross Feed will probably end up connected to the apron with a flexible rubber cover to protect it.
Any recommendations would be appreciated and thanks in advance for your time.
Cheers.
Any recommendations would be appreciated and thanks in advance for your time.
Cheers.