South Bend lathes for sale with videos!!!
Close
Login to Your Account
Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2010
    Location
    northeastern Pa, USA
    Posts
    459
    Post Thanks / Like
    Likes (Given)
    73
    Likes (Received)
    117

    Default South Bend lathes for sale with videos!!!

    I am offering my 4 (four) South Bend lathes for sale. There comes a time in ones life when he realizes he has too much stuff. These four machines have been in my possession for years. Although some were just mounted to benches they were kept in a heated garage as long as I had them. These machines are in awesome condition. The green 9" which can use a new paint job has wear on the ways for the tailstock. It was used mainly for a drill press in a plastic plant. Still cuts beautifully. The rest of the machines exhibit little wear. All have wheels to move around. Some have drawers for storage. All can be disassembled for easy transport. Once these are gone I have a Hendy conehead to move into the garage for rebuild. I am located in NE Pa minutes from the intersection of Intersate 80 and 81 zip 18225. PM me if interested.


    You can view a video of the 13" here: Number 1 - YouTube

    First up is a 13" South Bend 7' bed Silent drive ¾ HP wired for 120 volts Serial # 39553
    Forward and Reverse
    Equipped with: Micrometer stop
    Thread Dial (nos)
    Steady Rest
    Quick Change tool post 7 toolholders and misc tool bits
    Jacobs drill chuck (#3 MT)
    8" 4 jaw chuck, 6" 4 jaw chuck, 6" 3 jaw chuck, 8 1/2"faceplate (new in Box)
    Drive plate
    Plain carriage stop (new in Box)
    2 oil cans, newer drive belt (synthetic), dead centers for headstock (#4 MT)
    This machine is a threaded spindle 1 7/8"-8 with 1" through bore. Greater
    than 48" center to center.

    Mounted on easily removable wheels. Fairly priced @ $1450.00


    Next up is a 9" South Bend (wide nine) Model C serial # 41646 You can view a video here: Number 2 - YouTube
    very little wear on this machine 54" bed !!!!
    ½ HP with new drive belt---120 volts only Forward and Reverse
    Equipped with: Complete change gear set
    QCTP with 5 tool holders
    Lantern toolpost with 4 tool holders
    6" 3 jaw chuck with extra jaws
    8" 4 jaw chuck
    Dead center (#2 MT)
    Live center (#2 MT)
    Drill chuck (#2 MT)
    Felt lined drawers --2 oil cans and misc tool bits both carbide and HSS

    Mounted on easily removable wheels.
    Machine can be removed from table in a jiffy. Fairly priced at $850.00


    Next up is a 9" South Bend Junior (wide nine) Serial # 68815 View video here: Number 3 - YouTube
    ¾ HP wired for 120 volts Forward and Reverse 54" bed !!!!!

    Comes loaded with stuff: QCGB- starts at 4TPI to 224 TPI
    Thread Dial
    Steady Rest
    Follow Rest
    Base for milling attachment
    Micrometer stop
    Lantern tool post with many holders
    5 (five) micrometers 0" to 5" and some standards
    RPM speed indicator with instructions
    fish tails, thread gage, depth gage, surface gage
    Inside and outside spring calipers
    5" 3 jaw chuck with extra jaws
    6" 4 jaw chuck
    Dog drive plate and dogs
    new back plate threaded 1 1/2-8
    offset tailstock adapter (#2 MT)
    Drill chuck (#2 MT)
    Live center (#2 MT)
    Dead centers both #2 an #3 MT with sleeve for headstock
    Oil cans and much more including South Bend How to Run a Lathe and
    How to do this and that pamphlets.

    This machine was originally owned by a retired man who made long rifles. Some of the tooling included but not listed must be from his gun making endeavors.

    Mounted on a table with easily removable wheels. 3 felt lined drawers with inside sliders in every drawer. Table height can also be lowered by removing/cutting wooden feet on the steel legs.
    Priced at more than reasonable $1450.00 !!!!!



    Finally a 9" South Bend 42" bed Serial # 21239NAR8 View video here: Number 4 - YouTube
    ½ HP wired for 120 volts only --Forward and Reverse

    Equipped with:
    QCGB
    Thread Dial
    4 position tool holder
    5" 3 jaw chuck
    6" 4 jaw chuck
    new drive belt, new serpentine belt
    felt rebuild kit included
    Jacobs drill chuck, live center, dead center all (#2 MT)
    Thread gage, steel rule
    Misc cutting tools- center drill- oil can

    Mounted on wheels which are easily removable. Priced at $1000.00

  2. #2
    Join Date
    Aug 2017
    Country
    UNITED STATES
    State/Province
    Utah
    Posts
    13
    Post Thanks / Like
    Likes (Given)
    10
    Likes (Received)
    2

    Default

    Sent you a private message. I think....

  3. #3
    Join Date
    Apr 2010
    Location
    northeastern Pa, USA
    Posts
    459
    Post Thanks / Like
    Likes (Given)
    73
    Likes (Received)
    117

    Default

    The 9" South Bend with the 42" bed (green) is sold.

  4. #4
    Join Date
    Apr 2010
    Location
    northeastern Pa, USA
    Posts
    459
    Post Thanks / Like
    Likes (Given)
    73
    Likes (Received)
    117

    Default

    Sold the wide nine with the QCGB today. Number 3 youtube video. The 13 inch and wide nine change gear model still available.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •