WJ Birmingham
Cast Iron
- Joined
- Jan 21, 2016
- Location
- Swansea, IL USA
Ok, so I've tried to get in touch with Paula, with no success. I would prefer to have permission to do this, but, silence is acceptance.
I am going to make, for myself and anyone else who wants one, the detent plate for the older 9As, to allow use of the 10K Forward/Reverse Tumbler Assembly.
Plates will be waterjet from A36, at 0.500" thick. Hole will be slightly undersized to allow for final boring/fitting. Detent holes, nor mounting holes, will be drilled to allow for the end user to fit to their 9A.
Initial run will be from 1 sq ft of material. Price, $25.00/ea + ship.
Print to be used attached.
I am going to make, for myself and anyone else who wants one, the detent plate for the older 9As, to allow use of the 10K Forward/Reverse Tumbler Assembly.
Plates will be waterjet from A36, at 0.500" thick. Hole will be slightly undersized to allow for final boring/fitting. Detent holes, nor mounting holes, will be drilled to allow for the end user to fit to their 9A.
Initial run will be from 1 sq ft of material. Price, $25.00/ea + ship.
Print to be used attached.