"I tried Phase 2 but didn't like the quality."
There are quite a few Aloris knock-offs, and the quality DOES vary.
I, also, have not been overly impressed by Phase II's quality.
They have had several significant quality issues, thankfully now resolved, which are as innocuous as bad setscrews for the holders, and defective assembly (cross-threading) of the "piston" to its cam follower.
Grainger once had a Aloris knock-offs, both "piston" and "wedge" type, in all Aloris' sizes.
The "wedge" type is, of course, Mr. Sirola's (his company's name is his family's name, spelled backwards) significant improvement over his original QCTP, still manufactured today, in the larger sizes (CA, etcetera).
I purchased one of Grainger's close-outs, an AXA size, and I was much impressed by its quality ... significantly higher than Phase II, but, obviously, not as high as Aloris'.
I use Aloris on my "toolroom" lathes, and knock-offs on my "engine" lathes.
Thankfully, most knock-off holders are interchangeable with the name-brand (Aloris, Dorian, etcetera) holders.
And, there are some knock-off holders for which the original manufacturer has no equivalent.