cooncatbob
Hot Rolled
- Joined
- Jul 10, 2006
- Location
- Carmichael, Calif.
I getting a new motor for my lathe.
When I bought my lathe 4 years ago the old wiring was totally rotten.
I labeled everything and replace it exactly as it had been previously wire.
I have a 1953 SB with the Furnas Drum switch, the existing motor is 110 only, the new motor is 1/2 HP and can be wired 110 or 220.
I have both outlet right at the lathe.
My lathe is currently wired with the power cord attached to the drum switch, but I'm open to moving that cord to the motor.
Here's a drawing of how the drum switch is currently wired and also a picture of the wiring diagram for the new motor which I don't have yet.
Like I said I can solder and crimp and I'm game to starting over but electrical theory gives me a head ache, so any help would be appreciated.
I can't draw either.
Bob.
When I bought my lathe 4 years ago the old wiring was totally rotten.
I labeled everything and replace it exactly as it had been previously wire.
I have a 1953 SB with the Furnas Drum switch, the existing motor is 110 only, the new motor is 1/2 HP and can be wired 110 or 220.
I have both outlet right at the lathe.
My lathe is currently wired with the power cord attached to the drum switch, but I'm open to moving that cord to the motor.
Here's a drawing of how the drum switch is currently wired and also a picture of the wiring diagram for the new motor which I don't have yet.
Like I said I can solder and crimp and I'm game to starting over but electrical theory gives me a head ache, so any help would be appreciated.
I can't draw either.
Bob.