What's new
What's new

FS: Siemens Simoreg 6RB 2012 DC servo amp - 3 axes 200VDC 12/24 amps

aninventor

Aluminum
Joined
Dec 31, 2009
Location
Ohio - USA
I have a Siemens Simoreg DC servo system model D165 G200/12 MREQ Nr.:A MLFB 6RB 2012-38A00 Ausgang 12/24A 200V as removed from a Lagun CNC 3 axes mill. This servo amp was driving Siemens brush type servo motors model 1HGU3056. Per the dealer I bought the mill from this mill was in service and was working but was upgraded due to a bad (noisy) spindle bearing and the shop's need for a bigger faster mill. There was no power available in the warehouse at time of purchase so I did not witness it running. I have installed a VFD on the mill spindle motor and have verified that the spindle bearings are indeed bad. I have also verified that the servo motors, tachs, encoders, limit switches, etc on the mill all worked properly so it is highly probable that the dealer was telling it straight.

The entire unit is extremely clean inside, no evidence of repairs or failures, and it has obviously been very well taken care of. The amp is a 3 phase input system with a big voltage compensating true 3 phase transformer. I do not have 3 phase available in my shop, so I can not power up and test this system. As I can not test it myself and verify it for sure - it is being sold as is. This Simoreg servo amp is complete. I have been told by a Siemens service tech that this unit has later model upgraded boards in it. Speed control inputs to the servo amps are standard DC servo amp analog speed/direction signals, +10 to -10 VDC. This Simoreg system includes all the DC power supplies, 3 servo amplifiers, and the master motor control logic board. This Simoreg amp and DC supply weighs about 50 lbs by itself. I will also include the separate big 3 phase input line voltage adjustable transformer - another 50 lbs. - if you want that too. I have a digital copy of a manual for it that I can email the purchaser. The servo motors, tachs, etc. are not for sale.

Asking $500 OBO
Plus actual shipping if packed in a box.
If you want it crated for shipment - that is extra.
Contact me via email at
[email protected]


simoreg 001.jpg simoreg 010.jpgsimoreg 011.jpgsimoreg 012.jpgsimoreg 021.jpg
 








 
Back
Top