Starrett 656-617 drop dial indicator on Starrett # 652 Bench Gage Base.
Dial is 3-1/2" and reads 0.0001 (tenths) directly without having to use a vernier or get out your magnifying glasses.
Indicator has 0.400" of travel
Maximum height under the anvil when the anvil is up and the table is lowered is about 1-1/2".
The anvils is 3/4" diameter and the platter is 2" diameter. The platter moves up and down and locks in position. There is a fine adjust screw underneath.
The indicator has a lifting lever.
The 652 bench gauge base is heavy and has a 5" diamter base for stability.
It comes in the original wood, finger-jointed Starrett box.
The indicator and base look to be almost, if not actually, unused.
$150 plus shipping. Don't think it will fit in a flat-rate box. Weighs about 10 lbs, box is about 12" tall and 8" square.
Dial is 3-1/2" and reads 0.0001 (tenths) directly without having to use a vernier or get out your magnifying glasses.
Indicator has 0.400" of travel
Maximum height under the anvil when the anvil is up and the table is lowered is about 1-1/2".
The anvils is 3/4" diameter and the platter is 2" diameter. The platter moves up and down and locks in position. There is a fine adjust screw underneath.
The indicator has a lifting lever.
The 652 bench gauge base is heavy and has a 5" diamter base for stability.
It comes in the original wood, finger-jointed Starrett box.
The indicator and base look to be almost, if not actually, unused.
$150 plus shipping. Don't think it will fit in a flat-rate box. Weighs about 10 lbs, box is about 12" tall and 8" square.