aninventor
Aluminum
- Joined
- Dec 31, 2009
- Location
- Ohio - USA
$110 shipped to lower 48
This head is equipped for thru tool pressure coolant feed and has an HSK B 80 shank. It is rated for a max cap of M14 at 1000 rpm. It appears to be in good operating condition, turns freely and clutch reverses properly, but as I do not have a machine with a matching spindle I can not test it other than to turn it by hand on a bench. So, it is sold as shown and as is - no guarantees etc..
This head is equipped for thru tool pressure coolant feed and has an HSK B 80 shank. It is rated for a max cap of M14 at 1000 rpm. It appears to be in good operating condition, turns freely and clutch reverses properly, but as I do not have a machine with a matching spindle I can not test it other than to turn it by hand on a bench. So, it is sold as shown and as is - no guarantees etc..
